MultipassRFID - Rewritable Implantable RFID chip
An implantable RFID microchip, operates at 125khz. This is a T5577 chip, which has not been hard coded with a single ID, it can be reprogrammed as many times are you want. It is possible to copy a range of other RFID chips.
The MultipassRFID is an implantable RFID microchip, it can be read by all normal low frequency RFID readers. This chip can be rewritten many times, it can be used to clone some other types of RFID cards, such as HID Prox and EM400 cards, and also has a limited amount of read/write memory. This implant is commonly used to copy building access cards, letting simply swipe your hard to unlock doors and removing the need to carry the old card.
While not all RFID cards can be cloned, but many of the most common card types can be cloned to this chip. For more details on how the clone a card to this implant, visit our Guides page.
- One 2x12mm MultipassRFID chip, pre-loaded into injector needle. pre-sterilized.
- Standard injection prep kit (for details of the prep kit contents, visit the product page)
Implantable RFID microchip.
Operates at 125khz, and can be reprogrammed to support many protocols, meets ISO11784.
Data storage: 330 bites of re-writeable memory.
Reading and writing distance is about 3cm, but depends on the reader.
Implant size: 2x12mm
- safety: This product is a standard implantable chip. It is safe to implant, provided best practices are followed.
warranty: This product comes with Cyberise.Me's standard lifetime warranty. If the implant fails before your biology does, we will replace or refund it.
warranty: Warranty terms and conditions are that the implant is used in it's intended function. I.e. implanted within the body.
Warranty terms and conditions are that the implant is used in it's intended function. I.e. implanted within the body.
This product comes with Cyberise.Me's standard lifetime warranty. If the implant fails before your biology does, we will replace or refund it.